Restructered pre-import

Old Pages/3D Printing/Klipper.md

@@ -0,0 +1,49 @@
+2018.01.25
+
+Hack-a-day offered a project
+\[<https://hackaday.com/2017/12/26/fast-3d-printing-with-raspberry-pi-but-not-how-you-think/>,
+Fast 3D Printing with Raspberry Pi ??? But Not How You Think\]. However,
+it describes how to do stuff via OctoPi (child of OctoPrint), which we
+don't want to use. This led to the question ["Any way to divorce Klipper
+from Octo\*?"](https://github.com/KevinOConnor/klipper/issues/138) and
+also ["Klipper as
+daemon"](https://www.freelists.org/post/klipper/Klipper-as-daemon,1)
+
+## [Installation](https://github.com/KevinOConnor/klipper/blob/master/docs/Installation.md)
+
+Most of our machines use the [Atmega
+AVR](https://en.wikipedia.org/wiki/Atmel_AVR)
+[2560](http://www.microchip.com/wwwproducts/en/atmega2560) Rambo board.
+But we'll start with the Aden rebuild which uses the [Atmega
+AVR](https://en.wikipedia.org/wiki/Atmel_AVR)
+[644p](http://www.microchip.com/wwwproducts/en/atmega644p). Both are 16
+MHz. So, select the proper microprocessor and speed in the
+**menuconfig** step below.
+
+`   $ make menuconfig`
+`   $ make`
+`     Build Kconfig config file`
+`     Creating symbolic link out/board`
+`     Compiling out/src/sched.o`
+`     Compiling out/src/command.o`
+`     Compiling out/src/basecmd.o`
+`     Compiling out/src/debugcmds.o`
+`     Compiling out/src/gpiocmds.o`
+`     Compiling out/src/stepper.o`
+`     Compiling out/src/endstop.o`
+`     Compiling out/src/adccmds.o`
+`     Compiling out/src/spicmds.o`
+`     Compiling out/src/pwmcmds.o`
+`     Compiling out/src/avr/main.o`
+`     Compiling out/src/avr/timer.o`
+`     Compiling out/src/avr/gpio.o`
+`     Compiling out/src/avr/watchdog.o`
+`     Compiling out/src/avr/serial.o`
+`     Building out/compile_time_request.o`
+`   Version: v0.5.0-108-g1b3ef8a-20180125_195156-hostname`
+`     Linking out/klipper.elf`
+`     Creating hex file out/klipper.elf.hex`
+
+It has been suggested that socat may help debug stuff...
+
+`   $ sudo apt install socat`