Restructered pre-import

Old Pages/Old Wiki/HDD_Reverse.md

@@ -0,0 +1,21 @@
+This tutorial follows a series from 'sprites mods'
+[1](https://spritesmods.com/?art=hddhack&page=1) to attempt to reverse
+engineer a hard drive controller board
+
+# JTAG Hookup Process
+
+The first step is to hook up wires to the JTAG pins of the hard drive
+controller board in question.
+
+Fortuitously, the HDD board I have appears to have the same pinout as
+the one on Sprites Mods for the JTAG pins. This involved a fair bit of
+fine tip soldering to small pads and attempting to follow traces on a
+dense PCB. Pictures below
+
+*INSERT PICTURE HERE*
+
+Once the pins were soldered (GND, TDI, TMS, CLK IN, and TDO), the ARM
+JTAG programmer had to get hooked up to the soldered wires.
+
+The pinout of the JTAG programmer is oriented such that the power input
+on the bottom.