Restructered pre-import

Old Pages/Old Wiki/BATMAN-Advanced_Setup.md

@@ -0,0 +1,72 @@
+## Compile and install BATMAN-Advanced
+
+Download batman-adv and batctl. Standard "make && sudo make install".
+
+If no interface "wlan0" exists, check for a different wireless interface
+using 'ifconfig -a'
+
+## Setup ad-Hoc network
+
+1.  Disable NetworkManager
+    1.  Right-click on NetworkManager applet, un-check "Enable
+        networking".
+    2.  Fedora:
+            # /etc/init.d/NetworkManager stop
+    3.  Ubuntu:
+            # stop network-manager
+
+2.  Disable the firewall
+    1.  # iptables -F
+
+3.  # ifconfig wlan0 down
+
+4.  # iwconfig wlan0 mode ad-hoc essid hacdc-batman channel 8
+
+5.  # ifconfig wlan0 up
+
+## Setup BATMAN-Advanced
+
+In the unpacked 'batman-adv' directory:
+
+1.  # insmod batman-adv.ko
+
+In the batctl directory:
+
+1.  # ./batctl if add wlan0
+
+2.  # ifconfig wlan0 mtu 1527
+
+3.  # cat /sys/class/net/wlan0/batman_adv/iface_status
+
+    Should read "active".
+
+4.  # ifconfig wlan0 0.0.0.0
+
+5.  # ifconfig bat0 up
+
+6.  give bat0 an IP address
+    1.  ifconfig w.x.y.z netmask a.b.c.d up
+    2.  dhcp
+    3.  dhcp6
+    4.  dhclient
+    5.  Avahi/zeroconf
+    6.  IPv6
+
+## Testing BATMAN-Advanced
+
+Display local table of known peers (by MAC address of node):
+
+1.  batctl o
+
+Ping by batX MAC address of nodes:
+
+1.  batctl p uu:vv:ww:xx:yy:zz
+
+Monitor traffic of batX interface:
+
+1.  tcpdump -i bat0 -s 0 -v -X -n
+
+Test connectivity between nodes:
+
+1.  ping6 -p DEADBEEF -I bat0 (IPv4 address of host)
+2.  ping6 -p DEADBEEF -I bat0 (IPv6 address of host)