liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[FL-1666] Bootloader: info screen when we going to DFU. FuriHal: port SPI to LL. Cleanup. (#634)

Browse Source 
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
This commit is contained in:
あく
2021-08-12 11:48:05 +03:00
committed by GitHub
parent 5ed9bdbc37
commit 37d7870e52
43 changed files with 1558 additions and 1032 deletions
Download Patch File Download Diff File Expand all files Collapse all files
firmware/targets/f6/Src/adc.c
-128
View File
@@ -1,128 +0,0 @@
/**
******************************************************************************
* @file adc.c
* @brief This file provides code for the configuration
* of the ADC instances.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "adc.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
ADC_HandleTypeDef hadc1;
/* ADC1 init function */
void MX_ADC1_Init(void)
{
ADC_ChannelConfTypeDef sConfig = {0};
/** Common config
*/
hadc1.Instance = ADC1;
hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadc1.Init.LowPowerAutoWait = DISABLE;
hadc1.Init.ContinuousConvMode = DISABLE;
hadc1.Init.NbrOfConversion = 1;
hadc1.Init.DiscontinuousConvMode = DISABLE;
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc1.Init.DMAContinuousRequests = DISABLE;
hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
hadc1.Init.OversamplingMode = DISABLE;
if (HAL_ADC_Init(&hadc1) != HAL_OK)
{
Error_Handler();
}
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_14;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
sConfig.SingleDiff = ADC_SINGLE_ENDED;
sConfig.OffsetNumber = ADC_OFFSET_NONE;
sConfig.Offset = 0;
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
{
Error_Handler();
}
}
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(adcHandle->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspInit 0 */
/* USER CODE END ADC1_MspInit 0 */
/* ADC1 clock enable */
__HAL_RCC_ADC_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**ADC1 GPIO Configuration
PC5 ------> ADC1_IN14
*/
GPIO_InitStruct.Pin = RFID_RF_IN_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(RFID_RF_IN_GPIO_Port, &GPIO_InitStruct);
/* ADC1 interrupt Init */
HAL_NVIC_SetPriority(ADC1_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(ADC1_IRQn);
/* USER CODE BEGIN ADC1_MspInit 1 */
/* USER CODE END ADC1_MspInit 1 */
}
}
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{
if(adcHandle->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspDeInit 0 */
/* USER CODE END ADC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ADC_CLK_DISABLE();
/**ADC1 GPIO Configuration
PC5 ------> ADC1_IN14
*/
HAL_GPIO_DeInit(RFID_RF_IN_GPIO_Port, RFID_RF_IN_Pin);
/* ADC1 interrupt Deinit */
HAL_NVIC_DisableIRQ(ADC1_IRQn);
/* USER CODE BEGIN ADC1_MspDeInit 1 */
/* USER CODE END ADC1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
firmware/targets/f6/Src/crc.c
-82
View File
@@ -1,82 +0,0 @@
/**
******************************************************************************
* @file crc.c
* @brief This file provides code for the configuration
* of the CRC instances.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "crc.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
CRC_HandleTypeDef hcrc;
/* CRC init function */
void MX_CRC_Init(void)
{
hcrc.Instance = CRC;
hcrc.Init.DefaultPolynomialUse = DEFAULT_POLYNOMIAL_ENABLE;
hcrc.Init.DefaultInitValueUse = DEFAULT_INIT_VALUE_ENABLE;
hcrc.Init.InputDataInversionMode = CRC_INPUTDATA_INVERSION_NONE;
hcrc.Init.OutputDataInversionMode = CRC_OUTPUTDATA_INVERSION_DISABLE;
hcrc.InputDataFormat = CRC_INPUTDATA_FORMAT_BYTES;
if (HAL_CRC_Init(&hcrc) != HAL_OK)
{
Error_Handler();
}
}
void HAL_CRC_MspInit(CRC_HandleTypeDef* crcHandle)
{
if(crcHandle->Instance==CRC)
{
/* USER CODE BEGIN CRC_MspInit 0 */
/* USER CODE END CRC_MspInit 0 */
/* CRC clock enable */
__HAL_RCC_CRC_CLK_ENABLE();
/* USER CODE BEGIN CRC_MspInit 1 */
/* USER CODE END CRC_MspInit 1 */
}
}
void HAL_CRC_MspDeInit(CRC_HandleTypeDef* crcHandle)
{
if(crcHandle->Instance==CRC)
{
/* USER CODE BEGIN CRC_MspDeInit 0 */
/* USER CODE END CRC_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_CRC_CLK_DISABLE();
/* USER CODE BEGIN CRC_MspDeInit 1 */
/* USER CODE END CRC_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
firmware/targets/f6/Src/fatfs/spi_sd_hal.c
+9 -27
View File
@@ -1,26 +1,18 @@
#include "main.h"
#include "furi-hal-spi.h"
#include <furi-hal.h>
#include <furi.h>
#define SD_DUMMY_BYTE 0xFF
const uint32_t SpiTimeout = 1000;
uint8_t SD_IO_WriteByte(uint8_t Data);
static const FuriHalSpiDevice* sd_spi_dev = &furi_hal_spi_devices[FuriHalSpiDeviceIdSdCardFast];
static const FuriHalSpiDevice* sd_spi_dev = &furi_hal_spi_devices[FuriHalSpiDeviceIdSdCardFast];
/******************************************************************************
BUS OPERATIONS
*******************************************************************************/
/**
* @brief SPI error treatment function
* @retval None
*/
static void SPIx_Error(void) {
/* Re-Initiaize the SPI communication BUS */
furi_hal_spi_bus_reset(sd_spi_dev->bus);
}
/**
* @brief SPI Write byte(s) to device
* @param DataIn: Pointer to data buffer to write
@@ -29,13 +21,7 @@ static void SPIx_Error(void) {
* @retval None
*/
static void SPIx_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
bool status = furi_hal_spi_bus_trx(sd_spi_dev->bus, (uint8_t*)DataIn, DataOut, DataLength, SpiTimeout);
/* Check the communication status */
if(!status) {
/* Execute user timeout callback */
SPIx_Error();
}
furi_check(furi_hal_spi_bus_trx(sd_spi_dev->bus, (uint8_t*)DataIn, DataOut, DataLength, SpiTimeout));
}
/**
@@ -44,15 +30,7 @@ static void SPIx_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t
* @retval None
*/
__attribute__((unused)) static void SPIx_Write(uint8_t Value) {
uint8_t data;
bool status = furi_hal_spi_bus_trx(sd_spi_dev->bus, (uint8_t*)&Value, &data, 1, SpiTimeout);
/* Check the communication status */
if(!status) {
/* Execute user timeout callback */
SPIx_Error();
}
furi_check(furi_hal_spi_bus_tx(sd_spi_dev->bus, (uint8_t*)&Value, 1, SpiTimeout));
}
/******************************************************************************
@@ -70,6 +48,7 @@ void SD_IO_Init(void) {
/* SD chip select high */
hal_gpio_write(sd_spi_dev->chip_select, true);
delay_us(10);
/* Send dummy byte 0xFF, 10 times with CS high */
/* Rise CS and MOSI for 80 clocks cycles */
@@ -85,10 +64,13 @@ void SD_IO_Init(void) {
* @retval None
*/
void SD_IO_CSState(uint8_t val) {
/* Some SD Cards are prone to fail if CLK-ed too soon after CS transition. Worst case found: 8us */
if(val == 1) {
delay_us(10); // Exit guard time for some SD cards
hal_gpio_write(sd_spi_dev->chip_select, true);
} else {
hal_gpio_write(sd_spi_dev->chip_select, false);
delay_us(10); // Entry guard time for some SD cards
}
}
firmware/targets/f6/Src/fatfs/stm32_adafruit_sd.c
+23 -5
View File
@@ -91,8 +91,9 @@
#include "stdlib.h"
#include "string.h"
#include "stdio.h"
#include "spi.h"
#include <furi-hal-spi.h>
#include <furi-hal-gpio.h>
#include <furi-hal-resources.h>
#include <furi-hal-power.h>
#include <furi-hal-delay.h>
#include <furi-hal-sd.h>
@@ -282,6 +283,25 @@ static uint8_t SD_ReadData(void);
/* Private functions ---------------------------------------------------------*/
void SD_SPI_Bus_To_Down_State(){
hal_gpio_init_ex(&gpio_spi_d_miso, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh, GpioAltFnUnused);
hal_gpio_init_ex(&gpio_spi_d_mosi, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh, GpioAltFnUnused);
hal_gpio_init_ex(&gpio_spi_d_sck, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh, GpioAltFnUnused);
hal_gpio_write(&gpio_sdcard_cs, false);
hal_gpio_write(&gpio_spi_d_miso, false);
hal_gpio_write(&gpio_spi_d_mosi, false);
hal_gpio_write(&gpio_spi_d_sck, false);
}
void SD_SPI_Bus_To_Normal_State(){
hal_gpio_write(&gpio_sdcard_cs, true);
hal_gpio_init_ex(&gpio_spi_d_miso, GpioModeAltFunctionPushPull, GpioPullUp, GpioSpeedVeryHigh, GpioAltFn5SPI2);
hal_gpio_init_ex(&gpio_spi_d_mosi, GpioModeAltFunctionPushPull, GpioPullUp, GpioSpeedVeryHigh, GpioAltFn5SPI2);
hal_gpio_init_ex(&gpio_spi_d_sck, GpioModeAltFunctionPushPull, GpioPullUp, GpioSpeedVeryHigh, GpioAltFn5SPI2);
}
/** @defgroup STM32_ADAFRUIT_SD_Private_Functions
* @{
*/
@@ -295,9 +315,7 @@ static uint8_t SD_ReadData(void);
*/
uint8_t BSP_SD_Init(bool reset_card) {
/* Slow speed init */
const FuriHalSpiDevice* sd_spi_slow_dev = &furi_hal_spi_devices[FuriHalSpiDeviceIdSdCardSlow];
furi_hal_spi_bus_lock(sd_spi_slow_dev->bus);
furi_hal_spi_bus_configure(sd_spi_slow_dev->bus, sd_spi_slow_dev->config);
const FuriHalSpiDevice* sd_spi_slow_dev = furi_hal_spi_device_get(FuriHalSpiDeviceIdSdCardSlow);
/* We must reset card in spi_lock context */
if(reset_card) {
@@ -326,7 +344,7 @@ uint8_t BSP_SD_Init(bool reset_card) {
if(res == BSP_SD_OK) break;
}
furi_hal_spi_bus_unlock(sd_spi_slow_dev->bus);
furi_hal_spi_device_return(sd_spi_slow_dev);
/* SD initialized and set to SPI mode properly */
return res;
firmware/targets/f6/Src/fatfs/user_diskio.c
+8 -14
View File
@@ -35,7 +35,6 @@
/* Includes ------------------------------------------------------------------*/
#include "user_diskio.h"
#include "spi.h"
#include "furi-hal-spi.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
@@ -53,7 +52,6 @@ static DSTATUS User_CheckStatus(BYTE lun) {
return Stat;
}
static const FuriHalSpiDevice* sd_spi_fast_dev = &furi_hal_spi_devices[FuriHalSpiDeviceIdSdCardFast];
/* USER CODE END DECL */
/* Private function prototypes -----------------------------------------------*/
@@ -89,12 +87,11 @@ Diskio_drvTypeDef USER_Driver = {
DSTATUS USER_initialize(BYTE pdrv) {
/* USER CODE BEGIN INIT */
furi_hal_spi_bus_lock(sd_spi_fast_dev->bus);
furi_hal_spi_bus_configure(sd_spi_fast_dev->bus, sd_spi_fast_dev->config);
const FuriHalSpiDevice* sd_spi_fast_dev = furi_hal_spi_device_get(FuriHalSpiDeviceIdSdCardFast);
DSTATUS status = User_CheckStatus(pdrv);
furi_hal_spi_bus_unlock(sd_spi_fast_dev->bus);
furi_hal_spi_device_return(sd_spi_fast_dev);
return status;
/* USER CODE END INIT */
@@ -123,8 +120,7 @@ DRESULT USER_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count) {
/* USER CODE BEGIN READ */
DRESULT res = RES_ERROR;
furi_hal_spi_bus_lock(sd_spi_fast_dev->bus);
furi_hal_spi_bus_configure(sd_spi_fast_dev->bus, sd_spi_fast_dev->config);
const FuriHalSpiDevice* sd_spi_fast_dev = furi_hal_spi_device_get(FuriHalSpiDeviceIdSdCardFast);
if(BSP_SD_ReadBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
/* wait until the read operation is finished */
@@ -133,7 +129,7 @@ DRESULT USER_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count) {
res = RES_OK;
}
furi_hal_spi_bus_unlock(sd_spi_fast_dev->bus);
furi_hal_spi_device_return(sd_spi_fast_dev);
return res;
/* USER CODE END READ */
@@ -153,8 +149,7 @@ DRESULT USER_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count) {
/* USER CODE HERE */
DRESULT res = RES_ERROR;
furi_hal_spi_bus_lock(sd_spi_fast_dev->bus);
furi_hal_spi_bus_configure(sd_spi_fast_dev->bus, sd_spi_fast_dev->config);
const FuriHalSpiDevice* sd_spi_fast_dev = furi_hal_spi_device_get(FuriHalSpiDeviceIdSdCardFast);
if(BSP_SD_WriteBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
/* wait until the Write operation is finished */
@@ -163,7 +158,7 @@ DRESULT USER_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count) {
res = RES_OK;
}
furi_hal_spi_bus_unlock(sd_spi_fast_dev->bus);
furi_hal_spi_device_return(sd_spi_fast_dev);
return res;
/* USER CODE END WRITE */
@@ -185,8 +180,7 @@ DRESULT USER_ioctl(BYTE pdrv, BYTE cmd, void* buff) {
if(Stat & STA_NOINIT) return RES_NOTRDY;
furi_hal_spi_bus_lock(sd_spi_fast_dev->bus);
furi_hal_spi_bus_configure(sd_spi_fast_dev->bus, sd_spi_fast_dev->config);
const FuriHalSpiDevice* sd_spi_fast_dev = furi_hal_spi_device_get(FuriHalSpiDeviceIdSdCardFast);
switch(cmd) {
/* Make sure that no pending write process */
@@ -219,7 +213,7 @@ DRESULT USER_ioctl(BYTE pdrv, BYTE cmd, void* buff) {
res = RES_PARERR;
}
furi_hal_spi_bus_unlock(sd_spi_fast_dev->bus);
furi_hal_spi_device_return(sd_spi_fast_dev);
return res;
/* USER CODE END IOCTL */
firmware/targets/f6/Src/gpio.c
-37
View File
@@ -67,12 +67,6 @@ void MX_GPIO_Init(void) {
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(RFID_PULL_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = CC1101_G0_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
// HAL_GPIO_Init(CC1101_G0_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin PBPin */
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -107,22 +101,6 @@ void MX_GPIO_Init(void) {
GPIO_InitStruct.Pin = DISPLAY_RST_Pin;
HAL_GPIO_Init(DISPLAY_RST_GPIO_Port, &GPIO_InitStruct);
/* NFC_CS */
HAL_GPIO_WritePin(NFC_CS_GPIO_Port, NFC_CS_Pin, GPIO_PIN_SET);
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Pin = NFC_CS_Pin;
HAL_GPIO_Init(NFC_CS_GPIO_Port, &GPIO_InitStruct);
/* DISPLAY_CS */
HAL_GPIO_WritePin(DISPLAY_CS_GPIO_Port, DISPLAY_CS_Pin, GPIO_PIN_SET);
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Pin = DISPLAY_CS_Pin;
HAL_GPIO_Init(DISPLAY_CS_GPIO_Port, &GPIO_InitStruct);
/* DISPLAY_DI */
HAL_GPIO_WritePin(DISPLAY_DI_GPIO_Port, DISPLAY_DI_Pin, GPIO_PIN_RESET);
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@@ -137,21 +115,6 @@ void MX_GPIO_Init(void) {
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(SD_CD_GPIO_Port, &GPIO_InitStruct);
/* SD_CS */
GPIO_InitStruct.Pin = SD_CS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
HAL_GPIO_Init(SD_CS_GPIO_Port, &GPIO_InitStruct);
/* CC1101_CS */
HAL_GPIO_WritePin(CC1101_CS_GPIO_Port, CC1101_CS_Pin, GPIO_PIN_SET);
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Pin = CC1101_CS_Pin;
HAL_GPIO_Init(CC1101_CS_GPIO_Port, &GPIO_InitStruct);
/* Enable all NVIC lines related to gpio */
HAL_NVIC_SetPriority(EXTI0_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
firmware/targets/f6/Src/spi.c
-374
View File
@@ -1,374 +0,0 @@
/**
******************************************************************************
* @file spi.c
* @brief This file provides code for the configuration
* of the SPI instances.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "spi.h"
#include <cmsis_os2.h>
/* USER CODE BEGIN 0 */
void Enable_SPI(SPI_HandleTypeDef* spi);
/* USER CODE END 0 */
SPI_HandleTypeDef hspi1;
SPI_HandleTypeDef hspi2;
/* SPI1 init function */
void MX_SPI1_Init(void)
{
hspi1.Instance = SPI1;
hspi1.Init.Mode = SPI_MODE_MASTER;
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
hspi1.Init.NSS = SPI_NSS_SOFT;
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi1.Init.CRCPolynomial = 7;
hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
if (HAL_SPI_Init(&hspi1) != HAL_OK)
{
Error_Handler();
}
}
/* SPI2 init function */
void MX_SPI2_Init(void)
{
hspi2.Instance = SPI2;
hspi2.Init.Mode = SPI_MODE_MASTER;
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi2.Init.NSS = SPI_NSS_SOFT;
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi2.Init.CRCPolynomial = 7;
hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
if (HAL_SPI_Init(&hspi2) != HAL_OK)
{
Error_Handler();
}
}
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(spiHandle->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspInit 0 */
/* USER CODE END SPI1_MspInit 0 */
/* SPI1 clock enable */
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PB4 ------> SPI1_MISO
PB5 ------> SPI1_MOSI
*/
GPIO_InitStruct.Pin = SPI_R_SCK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
HAL_GPIO_Init(SPI_R_SCK_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_R_MISO_Pin|SPI_R_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN SPI1_MspInit 1 */
/* USER CODE END SPI1_MspInit 1 */
}
else if(spiHandle->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspInit 0 */
/* USER CODE END SPI2_MspInit 0 */
/* SPI2 clock enable */
__HAL_RCC_SPI2_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**SPI2 GPIO Configuration
PC2 ------> SPI2_MISO
PB15 ------> SPI2_MOSI
PD1 ------> SPI2_SCK
*/
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_D_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(SPI_D_MOSI_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_D_SCK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(SPI_D_SCK_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN SPI2_MspInit 1 */
// SD Card need faster spi gpio
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_D_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(SPI_D_MOSI_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_D_SCK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(SPI_D_SCK_GPIO_Port, &GPIO_InitStruct);
/* USER CODE END SPI2_MspInit 1 */
}
}
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
{
if(spiHandle->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspDeInit 0 */
/* USER CODE END SPI1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI1_CLK_DISABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PB4 ------> SPI1_MISO
PB5 ------> SPI1_MOSI
*/
HAL_GPIO_DeInit(SPI_R_SCK_GPIO_Port, SPI_R_SCK_Pin);
HAL_GPIO_DeInit(GPIOB, SPI_R_MISO_Pin|SPI_R_MOSI_Pin);
/* USER CODE BEGIN SPI1_MspDeInit 1 */
/* USER CODE END SPI1_MspDeInit 1 */
}
else if(spiHandle->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspDeInit 0 */
/* USER CODE END SPI2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI2_CLK_DISABLE();
/**SPI2 GPIO Configuration
PC2 ------> SPI2_MISO
PB15 ------> SPI2_MOSI
PD1 ------> SPI2_SCK
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
HAL_GPIO_DeInit(SPI_D_MOSI_GPIO_Port, SPI_D_MOSI_Pin);
HAL_GPIO_DeInit(SPI_D_SCK_GPIO_Port, SPI_D_SCK_Pin);
/* USER CODE BEGIN SPI2_MspDeInit 1 */
/* USER CODE END SPI2_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
void NFC_SPI_Reconfigure() {
osKernelLock();
SPI_R.Init.Mode = SPI_MODE_MASTER;
SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
SPI_R.Init.CLKPhase = SPI_PHASE_2EDGE;
SPI_R.Init.NSS = SPI_NSS_SOFT;
SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8; // 8mhz, 10mhz is max
SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SPI_R.Init.CRCPolynomial = 7;
SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
if (HAL_SPI_Init(&SPI_R) != HAL_OK) {
Error_Handler();
}
Enable_SPI(&SPI_R);
osKernelUnlock();
}
void SD_SPI_Reconfigure_Slow(void) {
osKernelLock();
SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SPI_SD_HANDLE.Init.CRCPolynomial = 7;
SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
Error_Handler();
}
Enable_SPI(&SPI_SD_HANDLE);
osKernelUnlock();
}
void SD_SPI_Reconfigure_Fast(void) {
osKernelLock();
SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SPI_SD_HANDLE.Init.CRCPolynomial = 7;
SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
Error_Handler();
}
Enable_SPI(&SPI_SD_HANDLE);
osKernelUnlock();
}
void CC1101_SPI_Reconfigure(void) {
osKernelLock();
SPI_R.Init.Mode = SPI_MODE_MASTER;
SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
SPI_R.Init.CLKPhase = SPI_PHASE_1EDGE;
SPI_R.Init.NSS = SPI_NSS_SOFT;
SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SPI_R.Init.CRCPolynomial = 7;
SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
if(HAL_SPI_Init(&SPI_R) != HAL_OK) {
Error_Handler();
}
Enable_SPI(&SPI_R);
osKernelUnlock();
}
void Enable_SPI(SPI_HandleTypeDef* spi_instance){
if((spi_instance->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) {
__HAL_SPI_ENABLE(spi_instance);
}
}
void SD_SPI_Bus_To_Down_State(){
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_D_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(SPI_D_MOSI_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = SPI_D_SCK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(SPI_D_SCK_GPIO_Port, &GPIO_InitStruct);
HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_2, GPIO_PIN_RESET);
HAL_GPIO_WritePin(SPI_D_MOSI_GPIO_Port, SPI_D_MOSI_Pin, GPIO_PIN_RESET);
HAL_GPIO_WritePin(SPI_D_SCK_GPIO_Port, SPI_D_SCK_Pin, GPIO_PIN_RESET);
}
void SD_SPI_Bus_To_Normal_State(){
HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_SET);
HAL_SPI_MspInit(&SPI_SD_HANDLE);
}
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
firmware/targets/f6/Src/stm32wbxx_it.c
-5
View File
@@ -4,7 +4,6 @@
#include "task.h"
extern PCD_HandleTypeDef hpcd_USB_FS;
extern ADC_HandleTypeDef hadc1;
extern COMP_HandleTypeDef hcomp1;
extern RTC_HandleTypeDef hrtc;
extern TIM_HandleTypeDef htim1;
@@ -20,10 +19,6 @@ void SysTick_Handler(void) {
HAL_IncTick();
}
void ADC1_IRQHandler(void) {
HAL_ADC_IRQHandler(&hadc1);
}
void USB_LP_IRQHandler(void) {
HAL_PCD_IRQHandler(&hpcd_USB_FS);
}